How to Hack Wi Fi using Android

Do you want to test your network security? It used to be that you needed a desktop OS such as windows or Linux installed on a computer with a specific wireless network card.Now,however,you can also use certain android devices to scan and crack wireless networks.These tools are available for free as long as your devices are compatible.Hacking routers without permission is illegal.these steps are provided to test the security of your own network.We are not responsible for the illegal activity by the knowledge gained from these post.Hacking router without permission is an illegal activity which comes under Cyber Crime and there is a chance to punish under IT Act 2000.

WPA2 WPS Routers :

1.Root a compatible device : Don't think that each and every android mobile or tablet can able to crack a WPS pin.The device must have a Broadcom bcm4329 or bcm4330 wireless chipset,and must be rooted.The Cyanogen ROM will provide the best chance of success.Devices which can crack WPS2 are 

•  Nexus 7
•  Galaxy Ace/S1/S2/S3
•  Desire HD

2.Download and install bcmon : This tool enables monitor mode on your Broadcom chipset,which is essential for being able to crack the PIN. The bcmon APK file is available for free from the bcmon page on the Google code website.

• To install an APK file, you wil need to allow instalation from unknown sources in your Security menu. Step 2 goes into moral detail.

3.Run bcmon : After installing the APK file,run the app.If prompted, install the firmware and tools. tap the "Enable Monitor Mode" option.If the app crashes,open it and try again. If it fails more than 3 times, your device is most likely not supported.

• Your device must be rooted in order to run bcmon.

4.Download and install Reaver : Reaver is a program developed to crack the WPS PIN in order to retrieve the WPA2 passphrase. The Reaver APK can be downloaded from the developers thread on the XDA-developers forums.

5.Launch Reaver : Tap the Reaver for Android icon in your app drawer. After confirming that you are not using it for illegal purposes, Reaver will scan for available access points.Tap the access point you want to crack to continue.

• You may need to verify Monitor Mode before proceeding. If this is the case bcmon will open again.
• Access point you select must accept WPS authentication.Not all routers support this.

6.Verify your settings : In most cases you can leave the settings that appear at their default. Make sure that the "Automatic advanced settings" box is checked.

7. Start the cracking process : Tap the "Start Attack" button at the bottom of the Reaver Settings menu. The monitor will open and you will see the results of the ongoing crack displayed.

• Cracking WPS can take anywhere from 2-10+ hours to complete, and it is not always successful.

For Tips & Updates StayTune to TechGraduate2015.blogspot.in